Product Features:
- 5" TFT LCD digital color display
- Equipped with back-lit buttons that illuminate in the dark
- Includes flushmount, U-bracket, and traditional mount
- Camera easily mounts to forklift
- Precise 45° Viewing Angle
Monitor Specs
- Type TFT LCD
- Screen Size5.6"
- Dot Resolution800 X 3 (RGB) X 480
- Display Format/Contrast16:9 / 500:1
- Display Brightness400cd/㎡
- Viewing AngleU:50° D:60° L/R:70°
- Video Input3 channel
- Video Source1Vp-p, 75Ω
- Power SupplyDC 12V-24V (+/- 10%)
- Power Consumption5W
- Operating Temperature-30°C ~ +80° C
- Video SystemAuto NTSC/PAL
- Overall Dimensions5" (L) x 5" (H) x 1" (D)
- Weight400G
- Vibration Rating5G
- Dot Pitch154.08 (H) X 86.58 (V)
- Sync SystemInternal
- Screen Size5.6"
Camera Specs
- Sensor1/3" CMOS PC 3089
- TV SystemPAL / NTSC
- Effective Pixels756 x 504 Pixels
- Sensing Area4.80mm x 3.73mm
- Scanning System2:1 Interlace
- Sync SystemInternal
- Horizontal Sync Frequency15.625 kHz / 15.734 kHz
- Vertical Sync Frequency50 Hz / 60 Hz
- Video Output1.0Vp-p, 75Ω
- Gamma Correction0.45
- AGCAuto
- S/N RatioBetter than 46.5dB
- White BalanceAuto
- Electronic ShutterAuto:1/60 (NTSC) / 1/50 (PAL) ~ 1/100,000 Seconds
- BLCAuto
- Operation Frequency2400-2483.5MHZ
- Line of Sight Range50m
- Receiving Sensitivity-89dBm
- Video CodecMPEG4
- Frame RatePAL: 25f/s NTSC: 30f/s
- Transmission Power20dBm
- Spread SpectrumFHSS
- Delay120ms
- RF Bit Rate4Mbps
- Operating Temperature-20°C ~ 70°C, RH 95% MAX
- Storage Temperature-30°C ~ 80°C, RH 95% MAX
- Minimum Illumination0.1 Lux
- Power SupplyDC 9V-32V
- Waterproof RatingIP69K
- Viewing Angle45°
- 1 x Color Waterproof Forklift Camera
- 1 x 5.6" TFT LCD Digital Color Monitor with Universal Mount
- 1 x 33' Camera Cable
- 1 x U-Bracket
- 1 x Flushmount
- 1 x Remote Control
- 1 x Power Harness
- 1 x 4 Pin to 5 Pin Adapter
- 1 x Screw Kit for Installation
Hansom K warrants this product against material defects for a period of one (1) year from the date of purchase. We reserve the right to repair or replace any such defective unit at our sole discretion. Hansom K is not responsible for a defect in this system as a result of misuse, improper installation, damage or mishandling of the electronic components. We are not responsible for consequential damages of any kind.